Click for parts for this item

 Eligible: Yours for 3 Easy Pay payments of $99.99
Select Easy Pay Plan during checkout.

View Larger Picture

Tower Catalog Page:	197
E-mail This Page To A Friend

                 This is the FS-91II Surpass 4-Stroke Engine.

 This engine does not use a choke valve OR use a return fuel line to the tank.
    THERE ARE NO TOOLS OR EXTRA NEEDLE VALVE AS STATED IN THE INSTRUCTIONS.

FEATURES: New rear-mounted, updraft 60P Carb, Intake Manifold, and Coverplate.
          Helix gear-driven camshaft supported by ball bearings.
          Ringed piston.
          No longer utilizes a choke valve
          Grease-packed twin-sealed corrosion-resistant rear ball bearing.
          Two Year Warranty

INCLUDES: One Assembled Engine w/Carburetor.
          One type #F Glow Plug.
          One Muffler w/Manifold.
          One Set of Instructions and Decal.
            (Wrenches, Choke Valve Extension, and Mounting Template Are No
             Longer Included per O.S.)
REQUIRES: Fuel: 5%-15% nitromethane with 18% lubricant. Synthetic, castor, or
            a synthetic/castor blend may be used.
          NOTE: Certain four-cycle fuels cannot be used due to low oil content.
            However, SOME four-cycle fuels such as the Wildcat 4-Cycle 15%
            (CATP9109) may be used because it has 18% oil content.
            When choosing fuels for this engine, the modeler must be sure to
            select a fuel with at least a 18% lubricant content.
          Propeller (see SPECS)
          Starting and Field Equipment

SPECS:    Bore:                   27.7mm (1.09")
          Stroke:                 24.8mm (.976")
          Displacement:           14.95cc (0.912 cubic inch)
          Power Output:           1.6 BHP at 11,000 RPM
          Practical RPM Range:    2,000 - 12,000 RPM
          Crankshaft Thread Size: 5/16-24
          Weight-With Muffler:    24.2oz (686g)
          Weight-Without Muffler: 22.6oz (641g)
          Valve Clearance: Between .04mm and .1mm (or between .0015" and .004",
            measured between the valve tip and rocker arm)
          Length: 91.5mm (3.60") from backplate to front of drive washer.
          Width: 42.6mm (1.68") width of engine neglecting the mounting flanges
                52mm (2.05") distance between the mounting hole centers
          Height: 123mm (4.88")
          Suggested Prop(s): Stunt planes: 11x11-12, 12x10-12, 13x9
            Scale models: 13.5x8, 14x7, 15x6, 16x6, (12x8 & 12.5x7-3 blade)
          Construction: Aluminum and Aluminum alloys

          Needle Settings: High Speed: 1.5 turns out from fully closed
                           Low Speed:  2.5 turns out from fully closed with the
                                       throttle fully closed

COMMENTS: A fuel tank of approximately 300cc capacity is suggested. This allows
            up to 12-13 minutes flying time.
          Some Differences Between 4-Stroke and 2-Stroke Engines;
            4-Strokes are Quieter.
            4-Strokes get Better Fuel Economy.
            2-Strokes Generate More RPM (11,000-13,000 RPM with Prop
             while 4-Strokes rev to around 9,500 RPM)
            4-Strokes generate much more Torque and will Swing a larger Prop.
            4-Strokes have a realistic Sound; like a Real Aircraft Engine.
          OS no longer includes the gauges, tools, and choke valve extension.

         The new Surpass engines (Version II and III) have more power than
           their predecessors and also have more corrosion prevention
           on the inside of the crankcases.
         Although it is cost prohibitive, you can convert this to the pump
          version OSMG0890 using the following items:
            - OSMG2533   45983000 CARB #60N FS-91-P
            - OSMG6491   45968000 INT PIPE ASSY FS91-P
            - OSMG2230   72508001 PUMP UNIT PD-07
            - OSMG4153   45907010 COVER PLATE FS91-P
                                                                     MAF 5/4/00
                                                                          ir/jl
                                                               updt jxs 7/21/04
                                                                updt tjt 080804
                                                                updt OA 5/19/08
                                                               updt lmm 3/31/09



– If you need more information, use these O.S. resources –

Click Here: Manufacturer's Product Web Page
E-mail: enginesupport@hobbico.com
Web Site: http://www.osengines.com/
Phone: 217-398-8970


 
Postal Address:
O.S.
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators