This is the 1/10 scale twin motor electric powered, radio controlled,
              Tamiya Dualhunter 4WD off-road Racing Truck Kit.

FEATURES: Chassis: Polycarbonate monocoque frame locates motors and battery in
            center for superior weight distribution
          Drive: Four wheel gear train
          Motors: Two 540 size
          Bushings: Plastic and metal
          Shocks: Four plastic bodied friction shocks (not oil-filled)
          Electronic Speed Control: Tamiya TEU-103 BK designed for dual motor
            control
          Gearboxes: Front and rear preassembled and sealed, each gearbox can
            be independently removed from chassis for adjusting and maintenance
          Differential: Planetary gear
          Tires: V-spike, 2.3" (59mm) wide, 5.1" (130mm) outer diameter
          Wheels: Constructed of plastic, White in color, 1.9" (49mm) wide,
            2.2" (56mm) diameter
          Body: Unpainted polycarbonate with rear wing
          Pinion Gears: Two 18 tooth metal
          Bumpers: Front and rear plastic
          Suspension: Front and rear independent double wishbone
          Camber Tie Rods: Fixed
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Steering: Bell crank type with servo saver

INCLUDES: Tamiya Dualhunter 4WD off-road Racing Truck Kit two 540 size motors,
            tires, wheels, TEU-103 BK ESC, clear body, friction shocks, decals
            two 18 tooth pinion gears and instruction manual

REQUIRES: Radio: 2-Channel with 2 servos
          Radio Batteries: (8) AA size
          Battery: 6-cell flat battery with standard connector
          Charger: AC/DC Timed or Peak for 6-cell battery
          Paint: Polycarbonate safe spray or brush-on
          Misc. Items: Building and track equipment

SPECS:    Length: 17.1" (435mm)
          Width:  12.2" (310mm)
          Height:  8.1" (205mm)
          Weight:  4lbs (1810g)
            Body-
          Length: 16.7" (424mm)
          Width:   6.7" (171mm)
          Height:  5.1" (130mm) at highest point

COMMENTS: For replacement or to upgrade to Ball Bearings use:
            Qty.  Size      Location                 Qty.  Bearing Set
             2   5x11mm    Rear Axles                 1    DTXC1547
             2   5x11mm    Front Axles                1    DTXC1547
             2   5x11mm    Diff Gear                  1    DTXC1547
             2   5x11mm    Large Counter Gear         1    DTXC1547
             2   5x11mm    Medium Counter Gear        1    DTXC1547

                                                                   jxs 12/12/07
                                                                         ir/jxs