View Larger Picture

Tower Catalog Page:	114
E-mail This Page To A Friend

          This is the 1/10 scale electric powered, radio controlled,
           prebuilt almost ready to run Axial Scorpion Rock Crawler.

FEATURES: Chassis: Twin 0.10" (2.5mm) aluminum side plates with aluminum posts
            and molded nylon transmission/skid plate
          Drive: Full-time locked four wheel drive, composite drive shaft with
            hardened metal yokes
          Ball Bearings: Full set included
          Shocks: Super long nitride coated
          Gearbox: Sealed front and rear
          Differentials: Locked style (spool), high tolerance sintered locker
          Transmission: Designed to place weight of motor as low as possible
            while still allowing a wide range of gearing choices, transmission
            is locked with no differential action and hard anodized aluminum
            outdrive shafts, 2.6:1 center mounted
          Tires: 2.2" (56mm) wide Pro-Line M2 Hammer 4.75" (120.65mm) diameter
          Wheels: 2.2" (56mm) wide eight hole beadlocks, 2.51" (64mm) diameter
           with orange rock rings
          Suspension: Three link, all links constructed of lightweight
            and strong aluminum
          Body: .040" (1.02mm) thick polycarbonate body
          Solid axles that feature improved driveshaft angle, castor and class
            leading steering throw

INCLUDES: Prebuilt Axial Scorpion Rock Crawler, tires, wheels, body,
            instruction manual                                                _

REQUIRES: Radio: 2-Channel with 1 Servo
          Radio Batteries: (8) AA size
          Speed Control: Electronic speed control with On/Off switch
          Motor: 540/550 size
          Battery: 7.2V 6-cell stick pack with standard connector
          Charger: AC/DC timed or peak for 6-cell battery
          Misc. Items: Building and track equipment

SPECS:      VEHICLE-
          Length:     17.25"  (438mm)
          Width:      10"     (254mm)
          Height:      6.125" (156mm)
          Weight:      3.5 lbs (1588g) approx.
          Wheelbase:  12 - 12.6" (304 - 320mm)
          Ground Clearance: 3.125" (79mm)
          Articulation: 70°
          Gear Ratio: Adjustable from 15:1 - 74:1 with different pinion and
            spur gear choices
          Tires: 2.2" x 4.75" (56 x 120.65mm)
            BODY-
          Length:     17.25"  (483mm)
          Width:       7.125" (181mm)
          Height:      5.25"  (131mm)

COMMENTS: Also available in kit form, AXIC9001

          For Replacement Ball Bearings use:
            Qty.  Size      Location                      Bearing Set Qty.
            4    10x15      Gearbox                       DTXC1595    2
            8    5x11       Gearbox                       DTXC1547    4
            4    5x10       Gearbox                       DTXC1535    2
            2    8x16       Gearbox                       DTXC1585    1
            4    5x11       Axle                          DTXC1547    2

                                                                    jxs 5/29/08
                                                                         ir/jxs



– If you need more information, use these Axial resources –

E-mail: service@axialracing.com
Web Site: http://www.axialracing.com/
Phone: 949-600-8642


 
Postal Address:
Axial
8 GOODYEAR, SUITE 125
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators