This is the 1/8 scale glow powered, radio controlled,
Tamiya competition level TRF801XT Off-Road Truggy Kit.
FEATURES: Chassis: A7075 hard anodized Duralumin 0.12" (3mm) thick,
chassis side guards, carbon fiber servo plate and upper decks
Drive: Four wheel shaft drive
Fuel Tank: 5.1oz (150cc)
Clutch: Three shoe aluminum
Transmission: Single speed
Ball Bearings: Full set included
Shocks: 15mm large volume, aluminum bodied
Shock Towers: Machined aluminum 0.20" (5mm) thick
Radio Box: Sealed
Gearboxes: Sealed front and rear
Differentials: Sealed bevel gear
Brakes: Dual 1.2" (32mm) diameter shoes with turnbuckle linkage
system
Body: Low profile clear polycarbonate with high downforce wing
with locknut captured hinge pins, and front and rear stabilizers
Caster: Adjustable front and rear, caster/toe-in refers to the angle
of the front suspension when viewed from the side of the car in
relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Machined aluminum steering knuckles with servo saver
INCLUDES: Tamiya TRF801XT Off-Road Truggy Kit, clear body, wing, shocks, fuel
tank, air filter, decals and instruction manual
REQUIRES: Radio: 2-Channel with 1 high-torque servo for steering & standard
servo for throttle
Radio Batteries: Eight AA size
Receiver Battery: 6.0V
Engine: .21 - .28cu in (3.4 - 4.6cc)
Exhaust: Manifold and tuned pipe
Glow Starter: 1.2 volt
Starter Box: 1/8 scale
Tires: 1/8 scale truggy
Wheels: 1/8 scale truggy with 17mm hex
Paint: Polycarbonate safe spray or brush-on
Misc. Items: Fuel bottle, building and track equipment
Fuel: 2-cycle glow fuel with 10%-15% nitromethane, 16% lubricant-
Most of the fuels we carry meet or exceed the lubricant content
required for optimum performance and maximum engine life. In the
past, the conventional lubricant content used in fuel was 18%. But
with new advanced technologies, fuels like Red Alert and O'Donnell
for example, have a better quality of lubricants even though the
percentages of lubricant content are lower. These high-tech
lubricants provide exceptional cooling and protection.
SPECS: Vehicle-
Length: 22.3" (566mm)
Width: 16.8" (428mm)
Weight: 9.2 lbs (4.17kg) varies with radio gear and engine
Wheel Hubs: 17mm hex
Wheelbase: 14.7 - 14.76" (373-375mm) wheels on-center front-to-rear
Specs such as tread, track and groung clearance not provided by
manufacturer
Gear Ratio: 15.35:1 - 16.54:1
Body-
Length: 19" (483mm)
Width: 8.4" (213mm) at center (widest point)
6.3" (160mm) at front wheels (narrowest point)
Height: 4.3" (109mm)
COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Qty Bearing Set
4 8x16mm Front Hubs 2 DTXC1585
4 8x16mm Rear Hubs 2 DTXC1585
2 8x16mm Center Diff 1 DTXC1585
2 8x16mm Rear Diff 1 DTXC1585
4 10x6mm Steering Linkage 2 DTXC1561
2 5x10mm Clutch Bell 1 DTXC1535
jxs 8/05/08
ir/jxs
|