Parts Express Eligible:	Yes
Tower Catalog Page:	183
E-mail This Page To A Friend

           This is the S9151 Digital High Torque Rudder F3A Servo.
                 This can only be used with 4.8V batteries.

        This servo can produce high-current draw from your batteries.
        If using NiMH or LiPo batteries, make sure they are capable
                       of delivering sufficient amps.

FEATURES: Digitally enhanced microprocessors cut about 1/2 of the response
            time from transmitter input to servo reaction.
          Digital operation allows this servo to reach full power immediately
            and maintain torque longer.
          High-capacity, high-current wire with low resistance
          Coreless motor (a wire cage rotates around the magnet).
          High speed operation for immediate response
          Nylon gears
          Dual ball bearings on the output shaft
          Delivers high torque rudder operation for precision fixed-wing F3A
            pattern aircraft.
          Dust and water resistant (Not Waterproof)
          Black plastic case.
          One year warranty.

INCLUDES: One S9151 Digital High Torque Rudder F3A Servo w/Futaba J Connector
            and a small round servo horn
          Four Rectangular Grommets
          Four Brass Bushings
          Four 2 x 11mm Mounting Screws
          One Large Round Horn
          One Six Arm Horn
          One Four Arm Horn

SPECS:    Dimensions: 1.6 x 0.8 x 1.4" (40 x 20 x 37mm)
          Weight: 1.8oz (50g)
          Speed: .19 sec/60° @ 4.8V
          Torque: 132 oz-in (9.5 kg-cm) @ 4.8V
          Power Supply: 4.8V (Futaba does NOT recommend using 6V)

FEATURES: S9151 Digital Servo Precautions,
           -It is best to avoid long leads and Y-harnesses especially with
            standard grade wires. If problems are encountered, consider using
            heavy duty wire such as Futaba's Heavy Duty Series or Hobbico's
            Pro Series, minimizing lead lengths, and/or removing Y-harnesses.
           -Current Drain: Futaba S9151 Servo is specially designed for high-
            torque and high-speed, therefore very high current drain is normal
            at startup. For ultimate performance when using this servo, please
            review the following points.
            (1) When using systems with the battery fail safe function it has
              a higher cut-off voltage setting which will cause shorter
              operation time.
            (2) When installing the servo please check pushrod linkage to make
              sure there is no binding in order to prevent excessive power
              consumption and decrease the life of the motor and battery.

         This digital servo cannot be used with the following * AM *
               transmitters as the servo neutral signal is: 1310us).
        CONQUEST AM, FG Series (T4FG, T5FGK,T6FG, T6FGK, T7FGK), New Terratop,
              T3EGX, T3PGE, T2NL, T2LGX, T2FR, T2PK series.
      ****   Otherwise they will work fine with current AM systems  *****

                                                                    JAL 2/27/01
                                                                          ir/jl
                                                              updt jxs 10/31/03
                                                              updt jxs 11/01/04



– If you need more information, use these Futaba resources –

Click Here: Manufacturer's Product Web Page
E-mail: support@futaba-rc.com
Web Site: http://www.futaba-rc.com/
Phone: 217-398-8970


 
Postal Address:
Futaba
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators