View Larger Picture

Tower Catalog Page:	114
E-mail This Page To A Friend

          This is the electric powered, radio controlled, 1/8 scale
                SC8e Off-Road Race Truck Kit from Associated.

FEATURES: Chassis: Hard anodized 7075-T6 aluminum 0.13"(3.3mm) thick
            with functional roll cage and integral dirt shields
          Drive: Four wheel shaft
          Shocks: Big Bore composite bodied oil filled with 4mm gold shafts
          Shock Towers: Aluminum 0.12" (3mm) thick
          Body: Lexan 0.06" (1.5mm) thick unpainted short course truck
          Spur Gear: Molded composite 46 tooth
          Pinion Gear: 15 tooth
          Receiver Box: Enclosed, receiver box, servo, and battery tray remove
            from car in one piece for easy maintenance and cleaning
          Battery Tray: Molded tray supports two ROAR-approved 7.4V LiPo packs
            with room for foam pads, three hook and loop straps
          Wheels: KMC 4.5" (115mm) diameter, 1.7" (42mm) wide with bead guards
          Suspension: 0.39" (10mm) thick suspension arms with adjustable pivot
            bushings, alloy steel turnbuckles
          Bumper: Front and rear composite construction with mud flaps
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis, caster blocks adjust 14, 16, or 18 degrees with molded
            inserts
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Steering: Dual bell crank for more consistent steering and reduced
            bump-steer

INCLUDES: SC8e Off-Road Race Truck Kit with body, decals
            instruction sheet

REQUIRES: Radio: 2-channel with high-torque steering servo
          Electronic Speed Control for selected motor
          Motor: Brushed or brushless
          Battery: 1 or 2 6-cell NiMH packs OR
                   1 or 2 2-cell LiPo packs (7.4V, 11.1V or 14.4V)
          Battery Charger: Peak detection for type of battery selected
          Building and track equipment

SPECS:      Vehicle-
          Length: 24.2" (616mm)
          Width:  12"   (305mm)
          Weight: 9lbs (4082g) without electronics
          Wheelbase: 14.8" (375mm)
          Gear Ratio: 4.3:1
            Body-
          Length: 610mm (24")
          Width: 290mm (11.4")
          Height: 175mm (6.9")
          Thickness: 0.06" (1.5mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location
             4   15x21x4mm  Suspension (ASCC6862)
             4    8x5x3mm   Steering (ASCC6861)
             4   10x6x3mm   Steering (ASCC2604)
             4   8x16x5     Front/Rear Gearbox (ASCC9716)
             4   8x16x5     Suspension (ASCC9716)
             6   8x16x5     Front/Rear/Center Differentials (ASCC9716)

                                                                    jxs 3/06/09



– If you need more information, use these Associated resources –

Web Site: http://www.rc10.com/
Phone: 949-544-7500


 
Postal Address:
Associated
26021 COMMERCENTRE DR
LAKE FOREST, CA 92630  








Click here for Units of Measure Conversion Calculators