This is the DuraTrax LiPo 7.4V 1600mAh 20C Hard Case Mini Battery Pack
                             with Mini Plug.

FEATURES: For use in the DuraTrax Vendetta, Mini Quake, Cliff Climber and other
            1/16 to 1/18 scale vehicles that use batteries with mini plugs

INCLUDES: DuraTrax LiPo 7.4V 1600mAh 20C Hard Case Battery Pack with Mini Plug

REQUIRES: Balancer such as the Team Checkpoint Balancer, and 2S
            Adapter XH Plug,

SPECS:    Capacity: 1600mAh
          Number of Cells in Series: 2
          Rated Voltage: 7.4V
          Continuous Discharge Rate: 20C
          Maximum Recommended Charge Current: 1C (1.6 amps)
          Charge Lead: 24AWG, 1.2" (30mm) long wire w/XH Balance Plug
          Discharge Lead: 20AWG, 3.5" (90mm) long wire w/Mini Plug
          Pack Dimensions: 3.3 x 1.2 x 0.7" (85 x 31 x 17mm)
          Weight: 3oz (85g) all plugs and wires are included in weights

COMMENTS: ALWAYS use a LiPo-approved Charger
          ALWAYS use a LiPo Cell Balancer
          NEVER Charge over 4.2V per cell
          NEVER Charge at currents greater than 1C
          NEVER Charge through the "To ESC or "DISCHARGE" lead
          NEVER Trickle Charge
          NEVER allow to Discharge below 2.5V per cell
          NEVER disassemble or modify pack wiring in any way or puncture cells
          NEVER place on combustible materials or leave unattended during
            charging
          ALWAYS Charge in a fireproof location
          ALWAYS set charger's output volts to match battery volts
          ALWAYS keep out of reach of children
          All weights include wire leads and plugs
          All weights +/- 1g
          All measurements +/- 1mm

                                                                    jxs 5/26/09
                                                                         ir/jxs