This is the Novak Goat 3S Electronic Speed Control for
Brushless and Brushed Crawler Motors.
FEATURES: Operates on 2-3S Li-Po cells or 4-9 NiMH cells (1.2V/cell)
Crawling specific software with Zero Reverse Delay for quick response
in forward and reverse and Worm-Drive Profile for vehicles that do
not require electronic drag brakes
Fully programmable, user-friendly interface with six adjustable
parameters: Drag Brake (10 settings), Dead Band (5 settings),
Minimum Drive (5 settings), Drive Frequency in brush mode
(7 settings) LiPo Cut-Off and Reverse Motor Rotation
Specially designed MOSFET for greater effectiveness in 3S LiPo
applications
Water resistant case with gasket seal
Sensor-based for excellent braking and low-speed driveability
Auto detect brushed motor mode, locked rotor detection and thermal
overload protection
120 limited warranty through manufacturer
INCLUDES: Novak Goat 3S Electronic Speed Control with Heat Sink, Power Trans
Cap Module, 14G Power Wires,
Cooling Fan, Input Harness, External BEC Module for 3S applications
Instructions, Double Sided Tape
REQUIRES: Motor such as the Novak Crawler Series
Forty Five, Fifty Five or the Novak SS Pro
series motors
SPECS: Input Voltage: 2-3S Li-Po cells or 4-9 NiMH cells (1.2V/cell)
Size: 1.18 x 1.54" (30 x 39.1mm)
Weight: 1.50oz. (42.6g) without wires
Design: Sensor-based
Motor Limit: 13.5-turn (2S Li-Po) and 18.5-turn (3S Li-Po)
Novak 540-size sensored brushless 27-turn (2S Li-Po)
and 33-turn (3S Li-Po) 540-sized brush motor
On-Resistance (brushless): 0.00070 ohms @ 25°C trans. temp.
BEC: 6.0 volts DC / 5.0 amps
External BEC: 6.0 volts DC/3.0 amps switching regulator
Rated Current: 150 Amps @ 25°C trans. temp.
Braking Current: 150 Amps @ 25°C trans. temp.
Status LEDs: 4
Voltage Cut-Off: 6.25V (2S) or 9.75V (3S) (when LiPo Cut-Off
Circuitry is enabled)
Power Wires: 14G Super-Flex Copper-Strand Silicone Wire
COMMENTS: The esc does not include the Tamiya connector as stated on the box
jxs 8/19/09
ir/jxs
JMLM 3/16/12
