Tamiya 1/10 Corolla Axio apr GT TA-05V.2 Kit

Tower Stock# LXYHY5  •  Manufacturer Stock# 58448
Tamiya 1/10 Corolla Axio apr GT TA-05V.2 Kit (large view)
Easy Pay
Request 3 Payments ($75.01, $74.99, $74.99) Details
Notes from our tech department:
This is the 1/10 scale electric powered, radio controlled,
Tamiya Corolla Axio apr GT On Road Car Kit.


Chassis: TA05 version II with reduced width for better ground
clearance during chassis rolls and battery position shifted further
forward, composite bathtub style .08" (2mm) thick, single deck
Drive: Four wheel two belt drive, tension adjustable
Motor: 540 motor with pre-attached leads
Ball Bearings: Full set included
Shocks: Four oil filled CVA super mini, plastic body
Gearboxes: Enclosed, front and rear
Differentials: Two ball type, 37T
Transmission: Single speed
Tires: Slick racing tire with foam inserts, 2.5" (64mm) diameter,
0.94" (24mm) wide
Wheels: One-piece 6-spoke gray in color, 1.9" (48mm) diameter,
0.94" (24mm) wide, +2 offset
Body: Lightweight polycarbonate Corolla Axio apr with decals
Bumpers: Foam front bumper
Suspension: IFS (Inboard Front Suspension) with horizontally
mounted shocks with push rod and rocker arm, front and rear
lightweight reversible arms for fine tuning, double wishbone rear
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
Steering: Bell-crank type
Servo Saver: Included


TA05 ver.II rolling chassis with oil filled shocks, 540 motor,
clear body, slick tires, foam inserts, foam bumper, 6-spoke wheels
22 tooth pinion gear, 70 tooth spur gear, rear wing, mirrors, decal
sheet and instructions


Radio: 2-channel with 1 standard servo and Electronic Speed Control
Radio Batteries: 8 AA size
Battery: 6-cell stick pack with standard connector
Charger: AC/DC peak type for 6-cell battery
Paint: Spray or brush-on for Lexan body
Misc. Items: Building and track equipment


Length: 14.7" (373mm)
Width: 7.4" (188mm)
Height: 4.8" (122mm)
Weight: 2.3lbs (1060g)
Wheelbase: 10.1" (257mm)
Tread: 6.5" (167mm)
Gear Ratio: 1:7.19
Length: 16.7" (424mm)
Width: 7.6" (194mm)
Height: 3.5" (90mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 5x8mm Front Ball Diff 1 DTXC1523
2 5x8mm Rear Ball Diff 1 DTXC1523
2 10x15mm Front Ball Diff 1 DTXC1595
2 10x15mm Rear Ball Diff 1 DTXC1595
2 4x8mm flanged Motor Mount 1 DTXC1517
4 5x10mm Front Hubs 2 DTXC1535
4 5x10mm Rear Hubs 2 DTXC1535
2 4x8mm Center Pulley 1 DTXC1511
4 5x8mm Steering Arms 2 DTXC1523
4 5x8mm Front Shock Stays 2 DTXC1523

jxs 01/05/10

Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐