This is the Novak Brushless Crawling System for 2S & 3S Applications
    with the Goat 3S Electronic Speed Control and Ballistic 18.5 Turn Motor.

FEATURES:   Novak Goat 3S-
          Operates on 2-3S LiPo cells or 4-9 NiMH cells (1.2V/cell)
          Crawling specific software with Zero Reverse Delay for quick response
            in forward and reverse and Worm-Drive Profile for vehicles that do
            not require electronic drag brakes
          Fully programmable, user-friendly interface with six adjustable
            parameters: Drag Brake (10 settings), Dead Band (5 settings),
            Minimum Drive (5 settings), Drive Frequency in brush mode
            (7 settings) LiPo Cut-Off and Reverse Motor Rotation
          Specially designed MOSFET for greater effectiveness in 3S LiPo
            applications
          Water resistant case with gasket seal
          Sensor-based for excellent braking and low-speed driveability
          Auto detect brushed motor mode, locked rotor detection and thermal
            overload protection
            18.5 Turn Ballistic Motor-
          Completely rebuildable allowing upgrades or replacement of various
            parts
          Easy to adjust timing assembly
          Meets ROAR and IFMAR specifications
          12.3mm nickel-plated sintered neodymium rotor for maximum
            performance in high-temperature conditions
          0.125" (3.2mm) pinion shaft accepts all existing pinion gears
          Color-coded hand wound stator identifies number of motor winds
          Sensor-based for excellent torque and low-speed driveability
            controls
          Heavy duty solder tabs
          120 day limited warranty through manufacturer on both components
            beginning at date of purchase

INCLUDES: Novak Goat 3S Electronic Speed Control with Heat Sink, Power Trans
            Cap Module, 14G Power Wires, Tamiya style JST Battery Connector,
            Cooling Fan, Input Harness, External BEC Module for 3S applications
            Instructions, Double Sided Tape, Ballistic Spec Brushless 18.5 turn
            Motor with sensor wire

REQUIRES: Installing in vehicle

SPECS:      Novak Goat 3S-
          Input Voltage: 2-3S LiPo cells or 4-9 NiMH cells (1.2V/cell)
          Size: 1.18 x 1.54" (30 x 39.1mm)
          Weight: 1.50oz. (42.6g) without wires
          Design: Sensor-based
          Motor Limit: 13.5-turn (2S LiPo) and 18.5-turn (3S LiPo)
            Novak 540-size sensored brushless 27-turn (2S LiPo)
            and 33-turn (3S LiPo) 540-sized brush motor
          On-Resistance (brushless): 0.00070 ohms @ 25°C trans. temp.
          BEC: 6.0 volts DC / 5.0 amps
          External BEC: 6.0 volts DC/3.0 amps switching regulator
          Rated Current: 150 Amps @ 25°C trans. temp.
          Braking Current: 150 Amps @ 25°C trans. temp.
          Status LEDs: 4
          Voltage Cut-Off: 6.25V (2S) or 9.75V (3S) (when LiPo Cut-Off
            Circuitry is enabled)
          Power Wires: 14G Super-Flex Copper-Strand Silicone Wire

            Ballistic 18.5 Turn Motor-
          Watts: 119
          Sensor Harness Length: 9" (230mm)
          kV Rating:
          Motor Size: 2.07 x 1.41" (52.6 x 35.8mm)
          Shaft Diameter: 0.125" (3.2mm)
          Motor Weight: 6.6oz (187g) 1650
          Magnetic Material Operating Temp:* 392°F (200°C)
          * Motor is not capable of operating at 392°F (200°C). The recommended
            operating temperature is 160°F (70°C)

                                                                   jxs 12/14/09
                                                                         ir/jxs