This is the radio controlled, electric powered, almost ready to fly,|
Great Planes ElectriFly Evader Ducted Fan Sport Jet.
For Intermediate to Advanced Modelers.
This ducted fan jet reaches speeds over 90 mph (145 km/h),
and should only be flown at the flying site of an AMA-chartered club.
Because it can quickly disappear from sight, the pilot should remain
focused on the plane at all times.
Construction: Fiberglass fuselage, balsa wing and tail sections
Wings: One piece wing, mounted to fuselage with two phillips screws
Covering: Top Flite MonoKote
Motor: ElectriFly Ammo Inrunner Brushless 24-45-3790, GPMG5185
Ducted Fan: 56mm Great Planes HyperFlow, GPMG3910
Canopy: Clear, magnetically secured to fuselage, easy access to
Decals: Military and sport trim schemes-Navy, U.S. Air Force and
Warranty: Great Planes Model Manufacturing Company guarantees this
kit to be free from defects in both materials and workmanship at
the date of purchase.
ARF ElectriFly Evader Ducted Fan Sport Jet with military and sport
decals, ducted fan, motor, 15' (4.6m) bungee for hand launches,
plywood stand and instruction manual
Radio: 4-channel with mini receiver
Servos: Two 20 oz-in torque micro servos
Electronic Speed Control: 35A for brushless motors
Battery: Great Planes ElectriFly 14.8V (4S) 2200mAh 25C LiPo
Battery Charger: LiPo compatible
Building and field equipment
Wingspan: 26.5" (675mm)
Wing Area: 153 inē (9.9 dmē)
Weight: 28-30 oz (790-850 g)
Wing Loading: 26.4-28.2 oz/ftē (81-86 g/dmē)
Length: 30.5" (775mm)
Center of Gravity (CG): 3-3/8" (86mm) back from the cutout in the
Control Throws: Low Rate High Rate
Elevator: 3/16" (4.8mm) 7° 1/4" (6.4mm) 10°
Ailerons: 1/4" (6.4mm) 11° 3/8" (9.5mm) 17°
Following are the Top Flite MonoKote colors used to cover this model
and order numbers for six foot rolls;