ST Model Fox EPO Brushlss Glider Receiver-Ready 71"

Tower Stock# LXYYS3  •  Manufacturer Stock# SNNA1051
  • front/side (see larger view)
  • rear/side (see larger view)
  • out of package (see larger view)
Notes from our tech department:
This is the radio controlled, brushless electric powered, Rx-Ready
Fox 71" Scale Glider from ST Model.
For intermediate glider flyers 12 years of age and older.


Construction: EPO foam self aligning snap and lock construction
Wings: Two-piece with carbon wing rod, wings attach to fuselage with
screws and are easily removable for easy transport
Aileron Control: Dual servo
Motor: Brushless
Servos: Four preinstalled micro size with universal connectors
Propeller: 10x6 folding
Building Time: Ready to fly in under 1/2 hour


Fox 71" Scale Glider with propeller, motor, ESC, decals and
instruction manual


Transmitter: 4-channel
AA Batteries: Eight for transmitter
Motor Battery: 3s 11.1V LiPo
Deans Male Ultra Connector: WSDM1302 required if using above battery
(cut existing connector off ESC and solder the Deans Ultra Male
connector on the ESC
Charger: LiPo compatible, such as the ElectriFly PolyCharge DC
Charger (GPMM3010)
To use this charger with the ElectriFly battery listed above, the
Equinox Cell Balancer must be used, remove the red 2-pin
plug on the battery and install 4mm female bullet connectors
Building and field equipment


Length: 34.6" (880mm)
Wingspan: 71" (1800mm)
Flying Weight: 24.2oz (685g)
Wing Area: 356 sq in (23 sq dm)
Wing Loading: 9.7 oz/sq ft (29.7 g/sq dm)
Center of Gravity (CG): 1/4" (6mm) ahead of the line shown in pics
#44 and 45 of the manual
Control Throws:
Aileron Up/Down: 15
Rudder Left/Right: 20
Elevator Up/Down: 15


The instruction manual INCORRECTLY states that this package
includes a transmitter and motor battery.

jxs 04/12/10

See Tower Catalog page 61.
Know Before You Fly
Easy RC: Sailplanes
Review #1
Manufacturer Mailing Address
Additional Manufacturer Contact Info