This is a .15 size Butterfly Glider Trainer.
FEATURES: Constructed of balsa and plywood
2-piece wing for easy transportation
Flat bottom airfoil for slow, forgiving flight characteristics,
capable of 12 mph landing speeds
Simple and quick to build
Three channel operation (, , )
INCLUDES: Hardware package (hinges, quick connectors, pushrods, misc. screws),
Full-Size Plans, Photo Illustrated Instructions, All Balsa and
Plywood to complete the kit.
REQUIRES: Radio: 4 Channel with Three
Engine: .10-.20 (2-stroke)
Covering: Two 6-Foot Rolls
Misc. Items: 4oz Fuel Tank, 2¼" Main Wheels, Rubber Bands,
Building and Starting Equipment, Engine Mount, and Prop.
SPECS: Wingspan: 99" Wing area: 916 sq in
Flying weight: 50oz : 7.5 oz/sq ft
Length: 48.5"
: 3-3/16" Back From Wings
Control Throws:
: ¾" Up and Down
Engine Down Thrust: 3°
Engine Right Thrust: 3°
Wing Incidence: +1°
Stab Incidence: 0°
COMMENTS: The instructions say to use a .10-.15 engine and the box says to use
a .15-.20 engine. The plane can use a .10-.20 engine.
Per Designer, a Thrustmaster or Speed 400 electric would be fine,
but instructions do not cover installation for electric power.
3-25-98/eke
ir/jl
updt jxs 8/16/04
Be sure to also check our list of Accessories Needed for this item.
| 
